Beanie ''B''

Beanie B

Fast. Simple. Efficient.

The Beanie B is designed to make cleaning nail holes on clipped/unclipped shoes and recovering tungsten pins quicker and easier at the anvil.

Machined from 1-inch-thick solid aluminium, the Beanie B sits flat and securely on the anvil while remaining extremely lightweight at less than 0.5 kg, compared to the usual steel figure of 8.

Clean All Your Nail Holes in One Go

Place the shoe on the Beanie B and the clips remain clear of the anvil, while the nail holes line up over the open channel below. This allows you to pritchel straight through every nail hole in one continuous motion, without having to reposition the shoe or work around the face of the anvil.

Fast, efficient and pritchel-friendly,  if your pritchel makes contact with the Beanie B, the aluminium is soft enough that it won't damage your tool.

Knock Out & Reuse Tungsten Pins

The Beanie B also features two dedicated holes for removing tungsten pins.

Simply place the shoe upside down over the appropriate hole, use a small punch to tap the pin through, then move the Beanie B to the edge of the anvil to collect it.

The pins can then be recovered and reused instead of being lost on the floor.

Key Features

• Cleans multiple nail holes quickly and efficiently
• Allows you to pritchel through the shoe in one continuous motion
• Keeps clips clear of the anvil
• Two holes designed for removing tungsten pins
• Sits flat on the anvil
• Extremely lightweight at less than 0.5 kg
• Compact, simple and built for everyday use
• Comes in a velvet bag to keep it protected in the toolbox during transport